Create a faux wood pallet wall

Blue Cow Kitchen wall
While up in LA for a Design Bloggers’ Conference, I had dinner at Blue Cow Kitchen and was completely drawn to the rustic, modern décor—exposed light bulbs, paper mache taxidermy and a wood pallet wall, the piece de resistance.

Scott and I talked about recreating it on one of the walls in our bedroom. After doing extensive research on using pallets in interiors, I decided pallets weren’t the best option. Dismanteling them was going to be extremely time consuming, and I worried about what the pallets might have been used to transport, like chemicals.
EverTrue
While hunting down Plan B, I discovered this EverTrue Edge V-Groove unfinished pine paneling. It’s not available in store at Lowe’s, but you can order it online and pick it up in the store. I took measurements and ordered nine packages of six (design for less than $100!).

I wanted to mimic the different wood tones that I saw in Blue Cow Kitchen. We bought three quarts of stain—Jacobean, Classic Gray and Natural.
Scott cutting
Scott cut the planks at different lengths to give the wall more variations—from six-inch pieces to 48-inch lengths. He just did it at random, but it’s wise to keep several long (we left one package of stained planks uncut), so you can cut what you need as you go.
Stain colors
We concocted five different colors with our three cans of stain. We used each of them in a pure state and layered the Gray with the Jacobean and the Natural. Don’t wait until the stain dries to layer. Using a sponge brush, we swiped on one color, let it sit a few minutes and used a rag to take off the excess before brushing on the second color with a different brush and a new rag.
Stained boards
After letting the boards dry completely for 24 hours, Scott and I began hanging.
The hanging begins
Starting at the bottom left corner of the wall, we used a nail gun to fasten the first board to the wall. We worked left to right and bottom to top, completing each row with pieces of our uncut boards.
Nailing boards
Using the Japanese saw
When we got to the window, we used a small Japanese flush cut saw to cut the boards flush with the widow frame and stained the edge to match the board.
Our room